Name: DG407DW-E3
Brand: Vishay Siliconix
SKU: DG407DW-E3
Price: 10.73000 USD
Availability: InStock

new

DG407DW-E3

Manufacturer part number:DG407DW-E3

Manufacturer:Vishay Siliconix

Description:200ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE DG407 28 Pins 500pA 15V 28-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:DG407DW-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Number of Pins	28
Weight	2.214806g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG407
Pin Count	28
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	44V
Min Supply Voltage	7.5V
Operating Supply Current	30μA
Power Dissipation	450mW
Max Supply Current	500μA
Propagation Delay	350 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 65pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Signal Current-Max	0.03A
Height	2.34mm
Length	17.91mm
Width	7.49mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG407DW-E3 Product Details

DG407DW-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 28. As a result of its 8 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 28 pins are injected into the body of the electronic part. The multiplexer consists of 2 circuits. Use DG407 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 100Ohm. Datasheets for functions of 28 pins are available. normally, users should not supply switches with voltages higher than 44V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 7.5V should be applied to the electronic component. This multiplexer would work with 30μA current. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. A dual power supply should have at least 5V voltage attached. A voltage of 15V can be used to operate the electronic component. A 16 input needs to be operated.