TS12A4515DBVR Overview
Shipping overseas is convenient due to the electrical component's packing in SC-74A, SOT-753. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Total terminations are 5. High-quality output is provided by the electronic component's 1 channels. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. A total of 5 pins are injected into the electrical part body. The analog switch ics are built using SPST - NC switching circuits. Use TS12A4515 to search for variants of the digital switches. This digital multiplexer has 20Ohm internal resistance. The functions of 5 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 2V. The analogue multiplexer could operate on 50nA current. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. Put voltage above 50nA on the multiplexer to cause damage. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A 1 input needs to be operated. There are various bandwidths available for data transfer.
TS12A4515DBVR Features
1 Channels
Switch Circuit: SPST - NC
50nA Supply Current
-3db Bandwidth: 520MHz
Bandwidth: 475MHz
TS12A4515DBVR Applications
There are a lot of Texas Instruments TS12A4515DBVR Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio signal routing
- Channel Banks
- Video switching
- Central office
- Modems
- HDTV
- Battery Powered Systems
- Avionics and Military Systems
- E1 Multiplexer
