Name: MAX395CWG+T
Brand: Maxim Integrated
SKU: MAX395CWG+T
Price: 5.45000 USD
Availability: InStock

new-10%

MAX395CWG+T

Manufacturer part number:MAX395CWG+T

Manufacturer:Maxim Integrated

Description:400ns, 400ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX395 24 Pins 100pA 5V 24-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX395CWG+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.295, 7.50mm Width)
Number of Pins	24
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	175Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1W
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	MAX395
Output	SEPARATE OUTPUT
Pin Count	24
Operating Supply Voltage	8V
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	8
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	7μA
Nominal Supply Current	30μA
Max Supply Current	20μA
Throw Configuration	SPST
Turn On Delay Time	500 ns
Voltage - Supply, Single/Dual (±)	2.7V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	400ns, 400ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Switch-off Time-Max	400ns
Height Seated (Max)	2.65mm
Length	15.4mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX395CWG+T Product Details

MAX395CWG+T Overview

As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around 0°C~70°C TA. A total of 24 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. 24 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. 8 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with MAX395 if you are looking for variants. A 175Ohm internal resistance characterizes this multiplexer. For details about the functions of 24 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2.7V as the lowest voltage for the electrical part. For this multiplexer to operate, 7μA current would be sufficient. Put voltage above 20μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. It is recommended that you attach at least 3V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 8V are compatible with the electrical part.