TPS51117RGYTG4 Overview
With its 14-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~5.5V and has a 4.5V~5.5V supply voltage. Worked in a -40°C~85°C TA dc switcher before. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, On Time Control, Power Good. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position QUAD . The 14 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Searching "TPS51117" will return other relevant dc to dc converter ics. 14 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 5.5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 10A. There is a maximum frequency of 550kHz on this dc regulators. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 5.5V to ensure safety and reliability. D-CAP™ series dc to dc voltage regulator belong to this series. DC switching uses 400μA when it is dormant. In order to ensure the dc switcher's functionality, users must limit the voltage to 28V due to the dc switcher's maximum input voltage. In order to use a 1.8V voltage supply, switching controller is necessary to have one. DC switchers cannot produce output currents greater than 10A. Datasheets state the switching converter can output up to 5.5V volts. At least 760mV voltage is output by the voltage controller. At 500kHz, this controller performs best.
TPS51117RGYTG4 Features
Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
Switching Frequency: 500kHz
TPS51117RGYTG4 Applications
There are a lot of Texas Instruments
TPS51117RGYTG4 DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
