TPS40200DRG4 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~52V volts and has 4.5V~52V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 35kHz~500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "TPS40200", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. DC regulator outputs 46.8V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3A. DC regulator500kHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 52V. In dormant mode, 1.5mA is used. Since the dc switcher's maximum input voltage is 52V, the voltage must be regulated accordingly. Voltage 4.5V must be supplied. An output current greater than 3A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 46V volts at its peak. A voltage controller's lowest output voltage cannot be less than 700mV.
TPS40200DRG4 Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40200DRG4 Applications
There are a lot of Texas Instruments
TPS40200DRG4 DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
