TPS3838J25MDBVREP Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 2.5V volt supply. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 5 pins on power management. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -55°C~125°C TA degrees. Power management has an output of Open Drain or Open Collector during operation. A similar IC managements number of the manufacturer can always be found by using TPS3838J25, the base power ics number. To be able to work, this power management requires 2.5V volts of power.
TPS3838J25MDBVREP Features
Simple Reset/Power-On Reset type
TPS3838J25MDBVREP Applications
There are a lot of Texas Instruments TPS3838J25MDBVREP Voltage Supervisors applications.
- Dash board
- Power communication system
- Automotive permanent magnet synchronous motors
- Leakage current detection
- Display equipment
- Power distribution systems of ICU
- Insulation fault location system
- Data storage applications
- Electronics installed in the vehicle
- Smart meter
