Name: CAT1021LI25
Brand: ON Semiconductor
SKU: CAT1021LI25
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	1W
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	40
Output	Open Drain or Open Collector
Pin Count	8
Power Supplies	3.3/5V
Number of Channels	1
Max Supply Voltage	3V
Min Supply Voltage	2.7V
Operating Supply Current	3mA
Max Supply Current	3mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Number of Voltages Monitored	1
Reset Timeout	130ms Minimum
Min Reset Threshold Voltage	2.55V
Max Reset Threshold Voltage	2.7V
Undervoltage Threshold	2.7V
Overvoltage Threshold	2.7V
Height Seated (Max)	4.57mm
Length	9.59mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	RoHS Compliant

CAT1021LI25 Product Details

CAT1021LI25 Overview

It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Through Hole mount. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. 8 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 3V volts in this PMIC. Through Hole is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 3mA volt supply current. There is a requirement for 3.3/5V power to power this power management. Voltage supervisor can work with a supply temperature of 3mA at the most.