TPS3838J25DBVRG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. In total, it has 5 pins on IC management. Power managment ic pin count is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 250nA. It is always advisable to use TPS3838J25, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 15μA.
TPS3838J25DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3838J25DBVRG4 Applications
There are a lot of Texas Instruments TPS3838J25DBVRG4 Voltage Supervisors applications.
- External alarm
- Personal computers
- Detection of phase imbalance
- Magnetic resonance imaging
- Power communication system
- Efficient information transmission
- Data storage applications
- Solar power charger
- Unattended substation automation
- Battery cars
