TPS3828-50DBVRG4 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. In a 5V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. There are 5 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 15μA. A similar IC managements number of the manufacturer can always be found by using TPS3828, the base power ics number. A maximum supply temperature of 25μA can be used.
TPS3828-50DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3828-50DBVRG4 Applications
There are a lot of Texas Instruments TPS3828-50DBVRG4 Voltage Supervisors applications.
- Radio
- Detection of phase sequence
- Refrigeration
- Data storage applications
- Battery-powered equipment
- Sensitive sensors
- Electronics installed in the vehicle
- Radar
- Set top box
- WiFi router
