Name: STM802LM6E
Brand: STMicroelectronics
SKU: STM802LM6E
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	STM802
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	60μA
Nominal Supply Current	60μA
Power Dissipation	320mW
Max Supply Current	60μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.65V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STM802LM6E Product Details

STM802LM6E Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 5V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 60μA. To find similar IC managements from the manufacturer, you can always search by STM802. It requires 5V watts of power to operate this voltage supervisor. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.