TPS3803G15QDCKREP Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. IC management is packaged as a 5-TSSOP, SC-70-5, SOT-353 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.3V. When 1 is applied to the power ic, it conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 5 pins on IC management. There are 5 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.3V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 3μA. It is always advisable to use TPS3803G15, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 6μA.
TPS3803G15QDCKREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.3V
3μA operating supply current
TPS3803G15QDCKREP Applications
There are a lot of Texas Instruments TPS3803G15QDCKREP Voltage Supervisors applications.
- Utility meter
- Consumer electronics
- Smart meter
- Battery-powered equipment
- Detection of phase imbalance
- Refrigeration
- Unattended substation automation
- Solar power charger
- Medical-specific insulation monitor
- Detection of phase loss
