MAX815KCSA+ Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 4.86V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 8 pins on the board. The pins of the power management system count 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 75μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX815, the base power ics number. The maximum supply temperature voltage supervisor can handle is 75μA.
MAX815KCSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
75μA operating supply current
MAX815KCSA+ Applications
There are a lot of Maxim Integrated MAX815KCSA+ Voltage Supervisors applications.
- DVR
- Set top box
- Network equipment
- Multi-voltage system
- Power distribution systems of CCU
- Automotive permanent magnet synchronous motors
- Detection of phase imbalance
- Military communications
- Consumer electronics
- Functional modules
