TPS3613-01DGSR Overview
This power management consists of 10 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 2 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your convenience. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 1.8V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 10 pins. Power managment ic pin count is 10. It is recommended that Vsup should not be less than 1.65V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 20μA. A similar IC managements number of the manufacturer can always be found by using TPS3613, the base power ics number. The maximum supply temperature that PMIC chip can work with is 40μA.
TPS3613-01DGSR Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3613-01DGSR Applications
There are a lot of Texas Instruments TPS3613-01DGSR Voltage Supervisors applications.
- Sensitive sensors
- Data storage applications
- Refrigeration
- Personal computers
- Radar
- Detection of phase sequence
- Military communications
- emergency room
- Detection of phase loss
- Military electronics
