TL7757IDR Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 4.3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 1.4mA. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using TL7757, the base power ics number. The maximum supply temperature voltage supervisor can handle is 2mA.
TL7757IDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current
TL7757IDR Applications
There are a lot of Texas Instruments TL7757IDR Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Stable power system
- Set top box
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Smartphones
- Battery cars
- Detection of phase loss
- Medical-specific isolation transformer
- DSP
