TPS26631RGER Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).24-VFQFN Exposed Pad has packaged voltage regulator in this manner.In this case, Surface Mount holds the current regulator in place.Current regulator is recommended that the operating temperature not exceed -40°C~125°C TJ.An input voltage wcurrent regulatorh a value of 4.5V~60V may be used as an input voltage.In addition to the 24 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.In the TPS26631 family, current regulator is a member.It should work as long as it is powered by a 24VV power source. If it does not, it will not work.As a result of 6A's output current, it offers maximum design flexibility.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.In terms of channel number, I would say that it is growing strongly/weakly: 1.The supply voltage (Vsup) should be greater than 4.5V.The boost converter operates at maximum voltage (Vsup) when it reaches 60V.
TPS26631RGER Features
Tape & Reel (TR) package
TPS26631 family
TPS26631RGER Applications
There are a lot of Texas Instruments TPS26631RGER Current Regulation/Managements applications.
- Automotive current measurement
- Over current monitor
- Industrial applications current measurement
- Over-current measurement
- Over-current protection
- Power management
- Engine management
- Diesel injection controls
- Programmable current source
- Suspension controls
