TLV810SDBZT Overview
As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 20μA. For similar manage ics search of the manufacturer, you can always refer to TLV810, the base PMIC number. A maximum supply temperature of 30μA can be used with this power management.
TLV810SDBZT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
TLV810SDBZT Applications
There are a lot of Texas Instruments TLV810SDBZT Voltage Supervisors applications.
- Radar
- Microcontroller system
- Power distribution systems of infant care room
- Electronics installed in the vehicle
- Radio
- Microprocessor system
- Urban rail transit weak current power monitoring
- Dash board
- Power distribution systems of operating room
- Battery-powered equipment
