LTC2933IDHD#PBF Overview
There are 16 terminals on this power management that allow it to be mounted. There is a Tube-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 6 channels. In this PMIC, you can find 16-WFDFN Exposed Pad functions for your reference. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. In a 12V supply voltage, the power management conducts. There is a voltage supply of 6 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. Power management has a total of 16 pins. This power management system has 16 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3.4V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 13.9V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use LTC2933, the base supervisor number, when searching for similar PMICs from the manufacturer.
LTC2933IDHD#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 3.4V
LTC2933IDHD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2933IDHD#PBF Voltage Supervisors applications.
- Power distribution systems of CCU
- Sensitive sensors
- Battery-powered equipment
- External alarm
- FPGA design
- Power communication system
- Electric heating appliances
- Urban rail transit weak current power monitoring
- Important electronics for automotive protection
- Electronics installed in the vehicle
