TLV4110IPE4 Overview
In the package, you will find a PDIP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 3V battery. The op amp ic has an array of 8 pins on it. Op amp rates 175μV as input offset voltage. Using an 700μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. The linear amplifier is packaged by using a TUBE axis. This electric component can work from a voltage of under 6V as far as supply voltage is concerned. A voltage of 2.5V or higher is recommended for the linear amplifier's supply voltage.
TLV4110IPE4 Features
8 Pins
supply voltage of 3V
110dB voltage gain
TLV4110IPE4 Applications
There are a lot of Texas Instruments
TLV4110IPE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
