TLE2081IDRG4 Overview
The linear amplifier is packaged in a D case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. There is an input offset voltage of 490μV for this buffer op amp. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.7mA and 10 . It is recommended to keep the voltage gain at 106dB at all times. Op amp ic has 1 channels. The temperature should not be lower than -40°C for operational amplifier ics to operate. It is recommended that op amp be used at temperatures below 85°C. The operating supply voltage of instrumentation amplifier is rated 19V voltage. To pack the operational amplifier ics, TUBE is adopted as the packing method. It is recommended that you conduct this electronic part using the dual supply voltage of 19V.
TLE2081IDRG4 Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2081IDRG4 Applications
There are a lot of Texas Instruments TLE2081IDRG4 Instrumentational OP Amps applications.
- Computer workstations
- Strain gauges
- Oscilloscopes
- PDA
- E-book readers
- Portable docking station
- Video data acquisition
- Television broadcasting equipment
- High/low-pass filter circuit
- Vehicle electronics
