TLV3704IN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .The part is shipped by Tube .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.The device includes 14 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLV3704 for more pin-to-pin solutions.A quiescent current of 1μA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 800nA .An excess of current supply over 800nA could result in malfunction of the comparator.A power supply of +-1.35/+-8/2.7/16V is sufficient for the operation of the device.You are allowed to input a maximum current of 250pA into the device.The voltage gain of the part is indicated by 120dB in the voltage formula.
TLV3704IN Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704IN Applications
There are a lot of Texas Instruments
TLV3704IN linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
