MIC841NYC5-TR Overview
For convenience, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a Open Drain output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The type of the chip can be classified as with Voltage Reference .Electronic comparator consists of 1 elements in total.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 5 .You can find more pin-to-pin solutions by searching MIC841 .As a result, this comparator displays a quiescent current of 3μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 10nA when using the device.A supply current exceeding 10nA may result in the comparator malfunctioning.Comparator electronics is not recommended to operate the system at a temperature above 85°C .Comparator electronics cannot be used at a temperature below -40°C .Comparator electronics is specified that the comparator's maximum supply voltage is 5.5V .A minimum supply voltage of 1.5V is permitted for this comparator.To ensure a high level of output quality, 1 channels work together.A comparator part from the Teeny™ series is used in this part.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
MIC841NYC5-TR Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC841NYC5-TR Applications
There are a lot of Microchip Technology
MIC841NYC5-TR linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
