TLV341IDBVRG4 Overview
Packaging for the buffer amplifier is in the form of a SOT-23 case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape and Reel case. The number of terminations is approaching the 6 mark. The pins on this board total to 6 in total. This linear amplifier should be powered by an 1.8V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 6 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. It is possible to operate this buffer amplifier from a supply current of 75μA . There should be no change in the voltage gain. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 125°C. This linear amplifier has a total of 1 elements. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. As a general rule, it is advisable to keep the op amp's supply voltage above 1.5V at all times.
TLV341IDBVRG4 Features
6 Pins
supply voltage of 1.8V
110dB voltage gain
TLV341IDBVRG4 Applications
There are a lot of Texas Instruments TLV341IDBVRG4 Instrumentational OP Amps applications.
- High speed sample
- High/low-pass filter circuit
- Weak signal detection
- pH (acidity)
- Precision measurement
- single/dual op amp sum and difference circuits
- Wireless base stations
- earphone
- Band-stop filter
- PDA
