TLV320AIC21IPFBRG4 Overview
For space-saving reasons, it is supplied in a TQFP package. We have adopted the packaging method of Tape & Reel (TR). Signals are prevented from reflecting off the end of transmission lines by 48 terminations. In terms of electronics, it is a 48-pin device. There are 48 pins configured on this board. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. In order for the supply voltage to be maintained at 1.95V, it should be set to its maximum value. It is possible to convert analog signals into digital signals using 2 A/D converters. Subcategory Codecs describes this electronic part. It is recommended that the supply voltage is maintained at 1.65V. In order to operate, it must be supplied with a voltage of 1.8V. A power supply of 1.83.3V is required for operation. As a precaution, the maximum operating temperature is set to 85°C. For normal operation, the operating temperature must be set at -40°C at least. Transmission of data takes place over 2 channels. The property IT ALSO REQUIRES 3.3V ANALOG SUPPLY belongs to this type. 2V is the maximum voltage that should be allowed for an analog input.
TLV320AIC21IPFBRG4 Features
Embedded in the TQFP package
2 A/D converters
IT ALSO REQUIRES 3.3V ANALOG SUPPLY
TLV320AIC21IPFBRG4 Applications
There are a lot of Texas Instruments
TLV320AIC21IPFBRG4 CODECs Interface ICs applications.
- Food & beverage
- Linear measurement
- Material handling
- Metal forming & fabrication
- Mobile equipement
- Motor feedback
- Packaging
- Printing
- Registration mark timing
- Spooling or level wind
