TLV2765IDG4 Overview
Packaging for the buffer amplifier is in the form of a 16-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 16 terminations this year. The pins on this board total to 16 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.4V. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 16 pins. As far as the input offset voltage is concerned, linear amplifier rates at 3.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 20μA, this op amp ic can operate. There should be no change in the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A total of 4 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V.
TLV2765IDG4 Features
16 Pins
supply voltage of 2.4V
101.58dB voltage gain
Output Type: Rail-to-Rail
TLV2765IDG4 Applications
There are a lot of Texas Instruments TLV2765IDG4 Instrumentational OP Amps applications.
- Band-pass filter
- Portable electronic products powered by batteries
- Mobile phone
- Band-stop filter
- Professional videography
- Micro signal measurement
- Navigation
- Medical instruments
- Weighing systems
- Power generator
