TLV2764IDRG4 Overview
It is packaged in an D-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.4V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 3.5mV for input offset voltage. A supply current of 20μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 101.58dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 4 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 3.6V, which is suitable. Keeping the linear amplifier's supply voltage above 1.8V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 1.8V volts.
TLV2764IDRG4 Features
14 Pins
supply voltage of 2.4V
101.58dB voltage gain
TLV2764IDRG4 Applications
There are a lot of Texas Instruments
TLV2764IDRG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
