TLV2464CPWG4 Overview
There is a TSSOP case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Rail/Tube case. It is estimated that there will be at least 14 terminations this year. The pins on this board total to 14 in total. Please take in mind that this instrumentation amplifier should be run at 3V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 14 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. You can run this op amp ic on 550μA . The voltage gain should stay at 109dB. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amp only at temperatures no higher than 125°C. This linear amplifier has a total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 3V voltage. This electric component can work from a voltage of under 6V as far as supply voltage is concerned. The linear amplifier's supply voltage should be higher than 2.7V. It is recommended that you conduct this electronic part using the dual supply voltage of 3V.
TLV2464CPWG4 Features
14 Pins
supply voltage of 3V
109dB voltage gain
TLV2464CPWG4 Applications
There are a lot of Texas Instruments TLV2464CPWG4 Instrumentational OP Amps applications.
Multimedia playback equipment
Communication device
Large motor controllers
Industrial control system
High input resistance broadband
Power generator
Professional videography
Test equipment
Multiplication circuits
Proportional counter tubes
