TLC252CDRG4 Overview
A SOIC case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. An 1.9mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 87.23dB. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. It should only be used at temperatures up above 70°C. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. I would like to point out that this electrical component is capable of working from a voltage below 16V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.4V at all times.
TLC252CDRG4 Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC252CDRG4 Applications
There are a lot of Texas Instruments
TLC252CDRG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
