TLV2460IPE4 Overview
In order to protect the op amps, a P case is used. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. It is possible to operate this buffer amplifier from a supply current of 550μA . You should keep the voltage gain at 109dB for the time being. This op amp ic has 1 circuits. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. Instrumentation amplifier shouldn't be used above 125°C . The operating supply voltage of the buffer op amp is rated at 3V. A TUBE-shaped amplifier is used to pack the buffer amps. It is important to keep in mind that the power supply voltage of this electric component is below 6V, which is suitable. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage. Conduct linear amplifier under the dual suuply voltage of 3V.
TLV2460IPE4 Features
8 Pins
supply voltage of 3V
109dB voltage gain
TLV2460IPE4 Applications
There are a lot of Texas Instruments TLV2460IPE4 Instrumentational OP Amps applications.
- Signal operation
- Medical imaging
- Thermocouples
- Non-polarized electrodes
- Industrial control system
- Portable media players
- Home audio systems
- Test equipment
- Broadcasting
- Measurements of Wheatstone bridge
