INA126EA/250G4 Overview
Op amp is packaged in VSSOP case. Op amps are INSTRUMENTATION AMPLIFIER types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape and Reel case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. Instrumentation amplifier is a part of Instrumentation Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 500μV voltage. The voltage gain should stay at 80dB. Instrumentation amplifier has 1 channels on it. It should not lower than -55°C to operate buffer amplifier. It is recommended that op amp be used at temperatures below 125°C. Op amp has total of 2 elements. With regard tp supply voltage, op amp is used under 36V. To keep the buffer amps' supply voltage higher than 2.7V. Conduct linear amplifier under the dual suuply voltage of 18V. Linear amplifier has a quiescent current of 175μA. Op amp resistance should stay within the range of 1GOhm.
INA126EA/250G4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA126EA/250G4 Applications
There are a lot of Texas Instruments
INA126EA/250G4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
