TLV2460CDG4 Overview
In order to protect the op amps, a SOIC case is used. There are two types of operational amplifiers in this circuit. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 500μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . Maintain 109dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125°C degrees. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TUBE. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 3V.
TLV2460CDG4 Features
8 Pins
supply voltage of 3V
109dB voltage gain
TLV2460CDG4 Applications
There are a lot of Texas Instruments
TLV2460CDG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
