TLV2454IPWG4 Overview
There is a TSSOP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 1.5mV. The buffer amplifier is capable of operating from a supply current of 23μA . It is recommended to keep the voltage gain at 103dB at all times. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 4. The operating supply voltage of the buffer op amp is rated at 3V. This linear amplifier pack is based on the TUBE axis. Under 6V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 3V.
TLV2454IPWG4 Features
14 Pins
supply voltage of 3V
103dB voltage gain
TLV2454IPWG4 Applications
There are a lot of Texas Instruments
TLV2454IPWG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
