Name: TLV2442QDGKRQ1
Brand: Texas Instruments
SKU: TLV2442QDGKRQ1
Price: 1.09000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Supplier Device Package	8-VSSOP
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100, LinCMOS™
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Base Part Number	TLV2442
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	10V
Min Supply Voltage	2.7V
Operating Supply Current	750μA
Nominal Supply Current	2.2mA
Power Dissipation	725mW
Output Current	50mA
Current - Supply	750μA
Slew Rate	1.4V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~10V ±1.35V~5V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2mV
Gain Bandwidth Product	1.81MHz
Voltage Gain	119.55dB
Voltage - Input Offset	300μV
Current - Output / Channel	50mA
Max Dual Supply Voltage	5V
Min Dual Supply Voltage	1.35V
Dual Supply Voltage	3V
Max I/O Voltage	2mV
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2442QDGKRQ1 Product Details

TLV2442QDGKRQ1 Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. 8 pins are available on the instrumentation amplifier. Op amp rates 2mV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 750μA. You should keep the voltage gain at 119.55dB for the time being. A instrumentation amplifier like this has 2 circuits. Buffer op amp is equipped with 2 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 5V. This electronic part is recommended to be used with an 750μA supply for best performance. Under 10V is the minimum supply voltage for this electric component. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. This electrical part should be conducted under the dual supply voltage of 5V volts when you conduct this part. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100, LinCMOS? series.