LT1207CS#PBF Overview
Packaged in a 16-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Current Feedback type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 3mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 20mA, this op amp ic can operate. 68dB should remain the voltage gain. The linear amplifier consists of 2 different elements in total.
LT1207CS#PBF Features
16 Pins
supply voltage of 15V
68dB voltage gain
LT1207CS#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1207CS#PBF Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
