TLV2344IDG4 Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 14 mark. A total of 14 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 1.1mV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. This op amp can operate from a supply current at 2.7mA. Voltage gain should remain at 87.23dB. On this buffer amplifier, there are 4 circuits. The operating supply voltage of instrumentation amplifier is rated 4V voltage. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLV2344IDG4 Features
14 Pins
supply voltage of 3V
87.23dB voltage gain
TLV2344IDG4 Applications
There are a lot of Texas Instruments TLV2344IDG4 Instrumentational OP Amps applications.
- Professional videography
- ECG equipment
- Band-pass filter
- Wireless base stations
- Home audio systems
- Tablets
- single/dual op amp sum and difference circuits
- Radiation thermometry transducers
- Hand-held batteries
- Logarithmic operation circuits
