TLE2141IDRG4 Overview
There is a SOIC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape & Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.4mV. It is possible to operate this buffer amplifier from a supply current of 3.5mA . 106.85dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least -55°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 22V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The electrical part is capable of being powered by a voltage of under 44V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 4V. As a general rule, you should conduct this electronic component under dual supply voltages of 22V volts.
TLE2141IDRG4 Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2141IDRG4 Applications
There are a lot of Texas Instruments
TLE2141IDRG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
