THS6052IDG4 Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 12V. It should be noted that this type of buffer amplifier is exactly what is known as a Line Driver or Receivers device. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 15mV. Instrumentation amplifier has 2 channels on it. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. The operating supply voltage of instrumentation amplifier is rated 28V voltage. With regard tp supply voltage, op amp is used under 30V. The linear amplifier's supply voltage should be higher than 10V. As an extra benefit of this operational amplifier ic, please refer to ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY. The interface IC type of this electronic part are classified as LINE DRIVER.
THS6052IDG4 Features
8 Pins
supply voltage of 12V
THS6052IDG4 Applications
There are a lot of Texas Instruments
THS6052IDG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
