TLE2074AIDWG4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 3mV for input offset voltage. A supply current of 6.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106dB. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 19V. In order to conduct this part, you will need to provide dual supply voltages of 19V volts.
TLE2074AIDWG4 Features
16 Pins
supply voltage of 5V
106dB voltage gain
TLE2074AIDWG4 Applications
There are a lot of Texas Instruments
TLE2074AIDWG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
