LMH6555SQE Overview
The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 16 terminations in the next few months. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3.3V volts. There are 16 pins on this chip. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. The operating supply voltage of the buffer op amp is rated at 3.3V. I would like to point out that this electrical component is capable of working from a voltage below 3.63V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.97V at all times. 55Ohm should be the range of resistance for the linear amplifier. Op amp's interface IC type can be classified as LINE DRIVER.
LMH6555SQE Features
16 Pins
supply voltage of 3.3V
13.7dB voltage gain
Resistance of 55Ohm
LMH6555SQE Applications
There are a lot of Texas Instruments
LMH6555SQE Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
