TLC5930PWP Overview
To save board space, it uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. In this LED driver, there are 12 outputs.Surface Mount is used to mount the led driver.With high efficiency and reliable performance, it emerges as a Linear.It is capable of operating at a temperature of -20°C~85°C TA. Based on the frequency of 25MHz, it operates.In this case, there are 24 terminations.With 24 pins at the base, this LED driver has a base configuration.It is possible that failures will occur if the voltage supply is below 3V.Segments counted are 12.It is mounted in the way of Surface Mount.LED drivers have a base part number of TLC5930.An acceptable maximum value for the supply voltage is 3.6V.There is 17V voltage output from this device.In addition, it is equipped with a total of 24 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.When the maximum supply current is below 50mA, the device can deliver high efficiency.40mA is the maximum amount of current that can be supplied to the load.
TLC5930PWP Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -20°C~85°C TA
Frequency of 25MHz
Supply voltage of 3.3V
TLC5930PWP Applications
There are a lot of Texas Instruments TLC5930PWP LED Driver ICs applications.
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for portable equipment
- Down lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Sports Facility Lighting
- Amusement Machines
- General lighting
- Architectural lighting
- OLED power supply for portable equipment
