LP5521TM/NOPB Overview
On the board, there is also a 20-WFBGA package that saves space.Surface Mount is used for mounting the led light driver.The system emerges as a DC DC Regulator with high efficiency.-30°C~85°C TA is a valid operating temperature for the led driver.Backlight provides many benefits.It operates with 20 terminations.The base is configured with 20 pins.There are 3 segments in it.The mount is on its way to Surface Mount.There is a base part number LP5521 for this LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.A 4.55V volt output voltage is provided by this device.A total of 20 pins are present on this device.Additionally, it can be classified as Display Drivers based on its characteristics.The minimum input voltage for this device is 2.7V.With a minimal supply voltage of 2.7V, it reaches the highest efficiency levels.Whenever the maximum supply current is allowed, the value reaches 5.5V.If the maximum supply current is less than 1.5mA, the device is capable of providing high efficiency.25.5mA is the maximum amount of current that can be supplied to the load.Having the switching frequency at 1.25MHz enables this electronic component to perform at its best.When no external factors are present, there is 1.5mA current consumption.
LP5521TM/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
LP5521TM/NOPB Applications
There are a lot of Texas Instruments LP5521TM/NOPB LED Driver ICs applications.
- High-end retail lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lighting PFCs, Linear Dimmable
- General lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Refrigeration lighting
- Architectural lighting
- Down lights
- LED Lightings for Industrial Equipment
- Panel lighting
