TLC555CPWG4 Overview
In the packaging with the TSSOP, there is a programmable timer enclosed in the package. In this case, the programmable timer's frequency is set to 2.1MHz.It is used to pack in Rail/Tube case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 360μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock has 57.209338mg in weight. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 15V. The timer clock runs quiescent current at 250μA. The number of Timers/Counters on the device is 1.
TLC555CPWG4 Features
Operate frequency at 2.1MHz
Package / Case: Rail/Tube
Max Operating temperature at 0°C
Quiescent Current at 250μA
1 Timers/Counters
TLC555CPWG4 Applications
There are a lot of Texas Instruments
TLC555CPWG4 Programmable Timers & Oscillators applications.
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
