TLC552CDRG4 Overview
There is a SOIC enclosure with the programmable timer. A frequency of 2.8MHz has been set for the programmable timer.It is used to pack in Tape and Reel case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 1.6mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 18V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 122.413241mg in weight. The minimum supply voltage of the chip must not be lower than 1V. The supply voltage of this chip should not exceed 18V. The timer clock runs quiescent current at 340μA. The number of Timers/Counters on the device is 2.
TLC552CDRG4 Features
Operate frequency at 2.8MHz
Package / Case: Tape and Reel
Max Operating temperature at 0°C
Quiescent Current at 340μA
2 Timers/Counters
TLC552CDRG4 Applications
There are a lot of Texas Instruments
TLC552CDRG4 Programmable Timers & Oscillators applications.
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
