NE556DBRE4 Overview
The timer clock is suitable for SSOP package. 500kHz sets the frequency of the programmable timer.It is used to pack in Tape & Reel (TR) case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 20mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 121.789551mg in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 30mA. The number of Timers/Counters on the device is 2.
NE556DBRE4 Features
Operate frequency at 500kHz
Package / Case: Tape & Reel (TR)
Max Operating temperature at 0°C
Quiescent Current at 30mA
2 Timers/Counters
NE556DBRE4 Applications
There are a lot of Texas Instruments
NE556DBRE4 Programmable Timers & Oscillators applications.
- Battery Powered Systems
- Internet of Things (IoT)
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
