TLC551CPE4 Overview
There is a PDIP enclosure with the programmable timer. Frequency is set to 1.8MHz on the programmable timer.It is used to pack in Rail/Tube case. To mount this digital timer with Through Hole. The operating supply voltage is rated at 360μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 440.409842mg in weight. The minimum supply voltage of the chip must not be lower than 1V. The supply voltage of this chip should not exceed 15V. The timer clock runs quiescent current at 170μA. The number of Timers/Counters on the device is 1.
TLC551CPE4 Features
Operate frequency at 1.8MHz
Package / Case: Rail/Tube
Max Operating temperature at 0°C
Quiescent Current at 170μA
1 Timers/Counters
TLC551CPE4 Applications
There are a lot of Texas Instruments
TLC551CPE4 Programmable Timers & Oscillators applications.
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
