TLC4501ACDG4 Overview
The linear amplifier is packaged in a D case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 10μV. You can run this op amp ic on 1mA . Op amp is a member of the 120dB's 120dB family. Instrumentation amplifier has 1 channels on it. Using this buffer op amp requires a temperature of at least 0°C. It is recommended that op amp be used at temperatures below 70°C. With regard tp supply voltage, op amp is used under 6V. The linear amplifier's supply voltage should be higher than 4V. There should be a dual supply voltage of 3V for you to conduct this electrical part.
TLC4501ACDG4 Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC4501ACDG4 Applications
There are a lot of Texas Instruments
TLC4501ACDG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
