TLV2765IPWG4 Overview
The linear amplifier is packaged in a TSSOP case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. It comes in a Rail/Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 16 terminations over the past year. In this case, there are 16 pins on the board. Please take in mind that op amp should be run at 2.4V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 16 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3.5mV. You can run this op amp ic on 20μA . Op amp is a member of the 101.58dB's 101.58dB family. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. With regard tp supply voltage, op amp is used under 3.6V. The linear amplifier's supply voltage should be higher than 1.8V. There should be a dual supply voltage of 1.8V for you to conduct this electrical part.
TLV2765IPWG4 Features
16 Pins
supply voltage of 2.4V
101.58dB voltage gain
TLV2765IPWG4 Applications
There are a lot of Texas Instruments
TLV2765IPWG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
