TLC27L9IN Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. The linear amplifier should be run at 10V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 14 pins are present on the instrumentation amplifier. Op amp ic rates 900μV for input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 57μA, this op amp ic can operate. There should be no change in the voltage gain. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC27L9IN Features
14 Pins
supply voltage of 10V
113.62dB voltage gain
TLC27L9IN Applications
There are a lot of Texas Instruments TLC27L9IN Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Measurements of Wheatstone bridge
- Biopotential
- High/low-pass filter circuit
- Logarithmic operation circuits
- Semiconductor detectors
- Band-stop filter
- Medical imaging
- Navigation
- Television
