ALD2701PAL Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 240μA and 10 . Op amp is a member of the 107.96dB's 107.96dB family. This op amp ic has 2 circuits. There are 2 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should not use op amp above 70°C degrees. The operating supply voltage of instrumentation amplifier is rated 5V voltage. A supply of 240μA or higher is recommended for use with this electronic part. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6V volts.
ALD2701PAL Features
107.96dB voltage gain
Output Type: Rail-to-Rail
ALD2701PAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2701PAL Instrumentational OP Amps applications.
- Instrumentation
- Portable docking station
- Measurements of Wheatstone bridge
- Inverse/same-phase proportional circuit
- ECG equipment
- Portable electronic products powered by batteries
- Professional videography
- Wireless base stations
- Weak signal detection
- Proportional operation circuits
