TLC25L2BCP Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. Op amp rates 235μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . Keeping the voltage gain at 116.9dB is the best course of action. On this instrumentation amplifier, there are 2 circuits that are connected together. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC25L2BCP Features
8 Pins
supply voltage of 5V
116.9dB voltage gain
TLC25L2BCP Applications
There are a lot of Texas Instruments TLC25L2BCP Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Industrial control system
- Comparator
- Signal operation
- Image computer boards
- Signal amplification
- Logarithmic operation circuits
- Communication device
- ECG equipment
- Proportional counter tubes
