TLC084AIPWPG4 Overview
In the package, you will find a HTSSOP EP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 20 terminations. A total of 20 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 20 pins on it. Op amp rates 390μV as input offset voltage. Using an 1.9mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. On the buffer amps, there are 4 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TAPE AND REEL axis. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 8V volts when you conduct this part.
TLC084AIPWPG4 Features
20 Pins
supply voltage of 5V
120dB voltage gain
TLC084AIPWPG4 Applications
There are a lot of Texas Instruments
TLC084AIPWPG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
